Garden Three-way Valve

Garden Three-way Valve

Details
Place of origin: China
Brand name: Yunnl
Product Name:Garden three-way valve
Size:DN15-DN50
Minimum Order Quantity: 0
Price: Negotiable
Packing:Yunnl standard packing
Payment Terms: L/C, D/A, D/P, T/T, Western Union,MoneyGram
Delivery Time:15 Days
Applicable temperature: 5℃ to 90℃
Category
Garden Pipe Fittings
 
Send Inquiry
Description
Technical Parameters

Garden Three-way Valve

 

Product Introduction

The Yuanlun garden three-way valve is a brass diverting valve for garden irrigation, landscape watering, underfloor heating and general plumbing. With a rotating T-port valve core, it supports two working modes:

  • Flow splitting: one inlet divides water to two independent outlets.
  • Flow merging: two inlet streams converge into one outlet.

Forged from HPb59 brass with EPDM seals, rated PN16 for 5℃-90℃ water. Available in DN15-DN50 with BSP or NPT threads. One compact valve replaces multiple separate shut-off valves, reducing connections and leak points while enabling flexible multi-zone watering.

 

Key Advantages

  • T-Port Flow Diversion

Precision-machined rotating T-port core supports flow splitting and merging. Feeds sprinklers and drip irrigation simultaneously. L-port pattern available on request.

  • HPb59 Brass Body - Corrosion Resistant

Forged high-grade HPb59 brass performs reliably under humid outdoor conditions and fertilized irrigation water. EPDM soft seals resist long-term cyclic wear.

  • Low Pressure Loss

Streamlined internal flow passage reduces pressure drop and eliminates fluid dead zones, cutting pump power consumption.

  • Compact & Service-Friendly

Fits narrow spaces like pipeline pits. Modular design allows quick disassembly for seal and wearing-part replacement.

  • Quality Verified

ISO 9001 certified factory. All valves pass visual inspection and pressure testing before shipment.

 

2

 

Specifications

Feature Description

Place of origin

China

Brand name

Yunnl

Product Name

Garden Three-way Valve
Body Material Forged Brass
Nominal Pressure PN16 (1.6 MPa)
Sealing Material EPDM
Thread Standard BSP as standard; NPT optional for customization
Applicable Medium Cold water, hot water, non‑corrosive irrigation liquid
Working Temperature 5℃ ~ 90℃

Size

DN15-DN50

Minimum Order Quantity

1

Price

Negotiable

Packing

Yunnl standard packing

Payment Terms

L/C, D/A, D/P, T/T, Western Union,MoneyGram

Delivery Time

15 Days

 

Working Principle

  1. Rotating the T-handle turns the internal T-port valve core, re-routing fluid pathways.

  2. Flow-splitting mode: one incoming stream divides into two independent outlet pipelines.

  3. Flow-merging mode: two incoming streams combine and discharge through one shared outlet.

  4. EPDM soft-seal rings ensure tight shut-off at PN16 rated pressure, preventing leakage.

 

Typical Application Scenarios

  • Garden irrigation & landscape watering (multi-sprinkler, drip-irrigation systems)

  • Residential & commercial plumbing pipeline diversion

  • Underfloor heating & HVAC auxiliary fluid distribution

  • Water-treatment auxiliary multi-port piping circuits

 

Installation & Maintenance

  1. Verify DN size and pressure rating match your pipeline. Remove debris from the valve cavity before installation.
  2. Perform a pressure test after installation. Apply soapy water to threaded joints to check for bubbles.
  3. Install a Y-type strainer upstream to capture sediment and prevent valve jamming.
  4. Do not apply excessive force when turning the handles. Avoid over-torque.
  5. Periodically inspect EPDM seals; replace if aging, cracking or damage is found.
  6. Drain residual water in freezing environments to prevent body cracking.
  7. For long-term storage, fully close the valve and drain internal liquid.

 

FQA

Q: What is the difference between T-port and L-port?

A: T-port allows flow splitting (one inlet to two outlets) and merging (two inlets to one outlet). L-port switches flow between two outlets but cannot feed both simultaneously. T-port is standard; L-port is available on request.

Q: Can this valve be used for hot water systems?

A: Yes. Working temperature range is 5℃-90℃, suitable for both cold and hot water systems including underfloor heating and HVAC.

Q: What thread standards are available?

A: BSP is standard. NPT threads are available on request for North American markets.

Q: Is this valve suitable for fertilized or chemical irrigation water?

A: The HPb59 brass body and EPDM seals are compatible with non-corrosive irrigation liquids, including diluted fertilizers. For strongly corrosive chemicals, please consult our sales team.

Q: How do I maintain this valve?

A: Install a Y-strainer upstream, inspect EPDM seals periodically, and drain water before freezing temperatures. The modular design allows easy seal replacement.

Q: Do you accept OEM?

A: Yes, we accept OEM and ODM orders, including custom branding, packaging and port configurations.

 

 

Hot Tags: garden three-way valve, China garden three-way valve manufacturers, suppliers, factory, Union Tail Pipe, Union Fitting, Five Way Valve, Male‑Female Threaded Coupling, 360 Degree Rotatable Internal Thread, Quick Connector Adjustable External Thread

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!