Wall Mounted Base
Wall-Mounted Base vs Ordinary Non-Base Pipe Fitting Comparison
Ordinary threaded pipe fittings have no mounting-flange lugs. After pipeline assembly, all mechanical stress generated by valve/tap operation, water-hammer and pipeline vibration transfers fully onto thread joints. Long-term operation easily causes thread loosening, joint leakage and pipe swing, requiring extra separate pipe clamps for auxiliary fixing.
Wall-mounted base is a special fitting with integrated fixing-flange (mounting lugs). It can be directly fastened onto wall / flat substrate by anchor-screws. Most pipeline dynamic load is borne by wall-mount base instead of threaded joints, reducing thread-joint stress, preventing swing and lowering leakage risk. It simplifies layout especially for exposed明装 piping and narrow-space installation.
|
Item |
Ordinary Non-Base Pipe Fitting |
Wall-Mounted Base (This Product) |
|
Wall-fix structure |
No built-in fixing-lugs; require additional pipe-clamps |
Integrated flange mounting-lugs for direct wall anchoring |
|
Stress bearing |
Threaded joints bear all pipeline dynamic load |
Wall-mount base absorbs most mechanical stress |
|
Pipeline swing risk |
High under vibration / water-hammer |
Effectively suppress pipe swing |
|
Auxiliary accessories |
Need independent pipe-clamps / brackets |
Anchor-screws only (customer-supplied) |
|
Installation space |
Require extra space for clamps |
Compact, suitable for narrow special-space |
|
Typical scenario |
Concealed buried pipelines |
Exposed wall-mount, garden, industrial equipment interfaces |
Product Overview
Yuanlun wall-mounted base is brass-made pipe-fixing fitting equipped with integrated fixing-flange (mounting lugs). The flange surface fits flush against wall or flat substrate. By anchor-screw fastening, it provides stable mechanical anchoring point for exposed pipelines and terminal equipment.
Surface adopts weather-proof treatment with freeze-thaw resistance and UV-resistance. It bears higher mechanical load than conventional fittings. Some variants support welding-free assembly. Working-temperature 5℃-90℃, PN16 nominal pressure rating. Widely-used in garden irrigation, household plumbing, industrial automation and special-environment projects such as clean-rooms.
Important note: Installation recommended to be completed by qualified plumbing technicians. Wall substrate must have sufficient load-bearing capacity; select matched anchor-fasteners according to wall material (brick, concrete, hollow-wall). Anchor-screws are not supplied with product, need to be selected on-site.
Key Advantages
-
High-Strength Load-Bearing Performance
Optimized brass material formula and integral flange structural design. Load-bearing capacity surpasses common ordinary pipe fittings, meets high-reliability requirements for industrial-grade working-conditions.
-
Flexible & Efficient Installation
Modular construction and embedded component technology shorten on-site construction cycle and cut labour-cost. Partial product variants support welding-free assembly to further improve erection efficiency.
-
Excellent Complex-Environment Adaptability
Special weather-resistant surface treatment with freeze-thaw resistance and anti-UV ageing property. Good corrosion-resistant performance, guarantees long-term stable service under outdoor extreme-climate and mildly corrosive working-environments.


Specifications
|
Feature |
Description |
|
Place of origin |
China |
|
Brand name |
Yunnl |
|
Product Name |
Wall Mounted Base |
|
Size |
DN15-DN50 |
|
Surface Treatment |
Weather-proof, freeze-thaw resistant, UV-resistant finish |
|
Thread Standard |
BSP as standard; NPT customizable upon special request |
|
Nominal Pressure |
PN16 (1.6 MPa) |
|
Working Temperature |
5℃ ~ 90℃ |
|
Applicable Medium |
Cold-hot water, non-corrosive liquid |
|
Operation Mode |
Mechanical anchor-screw wall fastening + threaded pipeline connection |
|
Minimum Order Quantity |
1 |
|
Price |
Negotiable |
|
Packing |
Yuanlun standard packing |
|
Payment Terms |
L/C, D/A, D/P, T/T, Western Union, MoneyGram |
|
Delivery Time |
15 Days |
How Wall-Mounted Base Works
-
Main Components & Function
|
Component |
Core Function |
|
Integral mounting-flange (lugs) |
Pre-drilled fixing holes, transfer pipeline mechanical load to wall substrate via anchor-screws |
|
Main fitting body |
Threaded port for connecting pipeline / terminal equipment |
|
Weather-resistant outer surface |
Anti-UV, freeze-thaw resistant, anti-corrosion protection |
-
Operating Principle
- Fit flange back-surface flush against flat wall / mounting substrate.
- Use matched anchor-screws passing through flange lug holes to fasten base firmly onto wall. Pipeline vibration, water-hammer and equipment torque load are transmitted from fitting body to wall substrate through flange.
- Connect pipeline or terminal equipment to threaded ports of wall-mounted base. Most mechanical stress is undertaken by wall-anchoring flange instead of threaded joints, which reduces thread loosening and joint-leakage risk.
- Mechanism reminder: Product only provides fitting body. Anchor-screws / expansion-bolts shall be selected and supplied on-site according to actual wall-substrate material. Hollow gypsum-board wall needs reinforced backing-plate to meet load-bearing requirement.
Application Scenarios
-
Garden Irrigation Systems
Use-case: Wall-fixed installation points for sprinklers and drip-irrigation branch-pipes. Project value: Flange mounting-lugs firmly anchor irrigation pipeline on outer wall, prevents pipe shaking caused by water-hammer, suitable for outdoor open-air working-environment.
-
Industrial Automation Pipelines
Use-case: Fixed supporting connection for air-cylinders, valves and other actuator peripheral pipelines. Project value: High-load-bearing structure stabilizes equipment interface, reduces vibration transfer to threaded joints.
-
Residential Household Plumbing Systems
Use-case: Exposed wall-mount pipeline layout; conceal water-pipe and cable routes for kitchen-bathroom to realize neat-looking decoration effect. Project value: Optimize exposed-pipe visual appearance, avoid pipeline swaying when operating terminal tap or valve.
-
Special-Grade Working-Environment Projects
Use-case: Safe and reliable pipeline-mounting solutions for clean-rooms and explosion-proof-zone installations. Project value: Corrosion-resistant, stable mechanical-performance, meets strict special-site specification requirements.
Installation Guide
-
Pre-Installation Check
- Confirm wall-mount base DN-size and thread-specification match on-site pipeline / terminal-equipment.
- Evaluate wall-substrate load-bearing capacity: concrete / solid brick wall preferred; hollow wall needs additional reinforced backing-plate.
- Prepare site-matched anchor-screw / expansion-bolt according to wall-material.
- Check flange mounting-surface is flat, without deformation or crack damage.
-
Installation Steps
- Place wall-mount base flange flush against target mounting-wall, mark hole-position according to flange lug holes.
- Drill hole on wall substrate, install matched expansion-anchors.
- Fasten anchor-screws through flange lugs and tighten; ensure flange fits fully flat against wall without gap or tilt.
- Wind PTFE-tape 3-5 clockwise turns on threaded ports, connect pipeline or terminal equipment onto wall-mount base. Apply wrench-torque only on fitting-body flats, do not apply torque on flange lugs.
- After assembly completion, slowly pressurize system and inspect threaded-joint for leakage. Shake pipeline slightly to verify wall-mount base is securely anchored without looseness.
-
Important Installation Notes
- Installation recommended for qualified plumbing technicians.
- Anchor-fasteners are customer-supplied; must select fastener type matching wall-substrate. Hollow thin-wall without reinforcement cannot undertake full rated load.
- Do not use flange lugs as torque force-bearing points when screwing pipeline fittings.
- Outdoor installation: confirm surface weather-resistant treatment integrity; avoid long-term immersion.
Maintenance & Troubleshooting
|
Phenomenon |
Probable Root-Cause |
Recommended Solution |
|
Wall-mount base loose from wall |
Anchor-screw ageing / loose; wall-substrate crumbled |
Retighten or replace expansion-anchor; reinforce wall-substrate if substrate damaged |
|
Thread-port joint leakage |
Insufficient PTFE-tape; cross-thread damage |
Re-apply qualified sealing-tape; replace damaged mating fittings |
|
Surface corrosion / coating peeling |
Long-term outdoor harsh-environment erosion |
Clean surface; adopt supplementary anti-corrosion coating for outdoor-exposed positions |
Routine-Maintenance Suggestion
- Visual inspection of anchor-screw fastening status: Quarterly
- Visual inspection for joint leakage and surface coating integrity: Annually
- Replace severely corroded base in case of substrate-material failure: As-required
FAQ
Q: Can I apply wrench torque on flange mounting lugs when tightening pipe thread?
A: Forbidden. Torque acting on flange lugs may crack brass flange or loosen wall anchors. Always apply wrench force on fitting body flats.
Q: Can wall mounted base be buried inside wall cavity?
A: Designed for exposed surface mount application. Buried installation will lose UV resistant protection and bring difficulty for later period anchor fastener inspection.
Q: What should I pay attention to for long term outdoor installation?
A: Periodically check anchor screw tightness and surface anti corrosion coating condition; avoid long term water immersion environment.
Products Summary
Yuanlun wall-mounted base is brass pipe-fixing fitting with integrated wall-mounting flange lugs, PN16 pressure-rating, DN15-DN50 size-range. Weather-proof surface treatment delivers freeze-thaw-resistance and UV-ageing-resistance. It transfers pipeline mechanical load to wall substrate to restrain pipe sway and lower joint-leakage risk. Widely-applied for garden irrigation, household plumbing, industrial automation and special-environment projects such as clean-rooms. Sample-order supported for pre-project-evaluation, 15-day standard lead-time for worldwide plumbing-HVAC distributors and engineering-contractors.
Factory Information
Zhejiang Yuanlun Valve Co., Ltd. was founded in 2006, formerly known as Yuhuan Guohong Valve Co., Ltd. It is located in Yuhuan, Zhejiang Province, known as the "Valve Capital of China". After nearly two decades of stable development, Yuanlun Valve is a professional manufacturer for HVAC valves integrating R&D, production and sales. Our product portfolio covers floor heating systems, air-conditioning systems, domestic water valves, including ball valves, thermostatic valves, manifolds, check valves, stop valves, filter valves, angle valves, pipe fittings, corrugated pipes and other series.
Hot Tags: wall mounted base, China wall mounted base manufacturers, suppliers, factory, Union Tail Pipe, Union Fitting, Five Way Valve, Male‑Female Threaded Coupling, 360 Degree Rotatable Internal Thread, Quick Connector Adjustable External Thread
