Brass Hard-sealed Gate Valve
Brass Hard-sealed Gate Valve vs Brass Globe Valve Comparison
Brass hard-sealed gate valve adopts gate plate vertical lifting structure, full-bore straight flow channel. Only for full-open / full-close isolation shut-off, not for continuous flow regulation. Bidirectional flow allowed, flow resistance is minimal at fully open position; but long-term half-open throttling will scratch metal sealing surfaces and cause internal leakage.
Brass globe valve uses disc-type valve-plug structure. It can realize on-off isolation and continuous flow throttling-regulation. Flow passes through tortuous flow-path, pressure loss is higher; cannot be used bidirectionally in many cases, it is the preferred choice for flow-adjustment working-conditions.
|
Item |
Brass Hard-sealed Gate Valve (This Product) |
Brass Globe Valve |
|
Core function |
Full-open / full-close pipeline isolation shut-off;NOT for long-term throttling regulation |
Shut-off + continuous flow throttling-regulation |
|
Internal flow-path |
Full-bore straight-through runner, very low pressure-loss when fully open |
Tortuous S-shaped runner, relatively high pressure drop |
|
Flow direction |
Bi-directional, works equally for forward / reverse flow |
Mostly unidirectional installation with required flow arrow |
|
Sealing form |
Metal-to-metal hard-seal between gate plate & valve seat |
Disc-to-seat sealing (hard-seal or soft-seal optional) |
|
Risk of misuse |
Half-open position will erode sealing faces → internal leakage failure |
Designed for partial-opening throttling, no such risk |
|
Operation stroke |
Long stroke; many handwheel rotations for full open-close |
Short stroke, fewer rotations |
|
Typical usage |
Branch pipeline isolation, maintenance cut-off for plumbing / HVAC |
Flow regulation & shut-off for heating, water-supply circuits |
Product Overview
Yuanlun brass hard-sealed gate valve is manual on-off isolation valve, adopting one-piece forged HPb59-1 brass body. It features metal-to-metal hard-sealing pair formed by gate plate and valve-seat. The valve realizes pipeline full-open / full-close cut-off; medium can flow bi-directionally. Full-bore runner minimizes pressure loss under fully-open condition.
PN16 nominal pressure-rating, working-temperature 5℃-90℃. Standard version applies to neutral non-corrosive media such as domestic hot-cold water, glycol-mixed anti-freeze liquid. Important limitation: This valve is designed for isolation cut-off only. Do NOT keep it in partial-opening state for continuous flow-regulation; it will rapidly damage metal hard-sealing surfaces and lead to internal leakage. Not suitable for strong-acid / strong-base, high-chloride petrochemical corrosive fluids without custom material upgrade. Widely-used for building plumbing, HVAC heating-cooling and general-purpose neutral-medium piping-systems.
Important note: Installation recommended to be completed by qualified plumbing / HVAC technicians. Operate valve only to fully-open or fully-closed position; avoid long-term half-open throttling. Thread joints shall use PTFE-tape for auxiliary sealing.
Key Advantages
- One-Piece Forged Brass Body: Seamless integrated HPb59-1 forged brass construction eliminates casting porosity weak points and greatly improves overall structural integrity and pressure-bearing performance.
- Reinforced Pressure-Resistant Design: Thickened valve-body, bonnet and gate-plate enhance burst-resistance and extend service-life under medium-pressure working-conditions.
- Optimized Threaded Connection: Extended female thread interface provides secure assembly and increases joint mechanical strength during installation.
- High Full-Bore Flow Efficiency: Standard full-bore straight-through runner minimizes pressure drop when valve is fully open, supporting large-volume neutral-medium transmission.
- Smooth Low-Torque Operation: Optimized stem-gate-plate kinematics delivers light-weight opening-closing torque, no jamming during normal full-open / full-close operation.




Specifications
|
Feature |
Description |
|
Place of origin |
China |
|
Brand name |
Yunnl |
|
Product Name |
Brass hard-sealed gate valve |
|
Size |
DN15-DN50 (female thread connection) |
|
Sealing Type |
Metal-to-metal hard-seal (gate plate & valve-seat pair) |
|
Flow Feature |
Full-bore straight-through runner, bi-directional flow |
|
Thread Standard |
ISO as default; G-type / NPT customizable |
|
Nominal Pressure |
PN16 (1.6 MPa) |
|
Working Temperature |
5℃ ~ 90℃ |
|
Applicable Medium |
Hot-cold tap-water, glycol-mixed non-corrosive anti-freeze liquid; Standard model NOT for strong-corrosion chemical / petrochemical media |
|
Operation Mode |
Manual red handwheel drive; only full-open / full-close isolation operation |
|
Minimum Order Quantity |
1 |
|
Price |
Negotiable |
|
Packing |
Yuanlun standard packing |
|
Payment Terms |
L/C, D/A, D/P, T/T, Western Union,MoneyGram |
|
Delivery Time |
15 Days |
Working Principle
-
Main Components & Function
|
Component |
Core Function |
|
One-piece forged brass valve-body |
Bear PN16 system pressure; full-bore straight-through flow-passage, female-thread connecting ports |
|
Bonnet |
Upper housing for valve-stem assembly, stem packing sealing chamber |
|
Manual red handwheel |
Input rotary operation torque for opening / closing |
|
Valve stem |
Convert handwheel rotary motion into vertical linear lifting stroke of gate plate |
|
Metal gate plate |
Vertical-lifting closing member; metal hard-sealing surface mates with valve-seat |
|
Valve-seat |
Fixed metal hard-sealing mating face inside valve-body |
|
Stem packing gland |
Prevent medium leakage along valve-stem moving clearance |
-
Operating Principle
Brass hard-sealed gate valve relies on vertical lifting motion of metal gate plate to realize pipeline on-off isolation:
- Rotate handwheel; valve-stem drives gate plate to perform vertical linear movement.
- Fully-open: Gate plate is lifted completely out of flow-passage. Medium passes straight-through full-bore runner, minimal pressure-loss, bi-directional flow allowed.
- Fully-closed: Gate plate descends and presses tightly against valve-seat metal sealing-face. Metal-to-metal contact achieves shut-off isolation, bi-directional sealing performance.
- Operation restriction: Do NOT maintain partial-opening for continuous throttling-regulation. At half-open state, high-speed medium flow will scour metal sealing-pair surfaces, create scratches and result in permanent internal-leakage failure. Temporary partial-opening is only permitted for very short-time commissioning / flushing; afterwards valve must return to full-open or full-closed position.
Operating reminder: This is an isolation cut-off valve, NOT a regulating valve. Long-term partial opening will destroy hard-sealing pair.
Application Scenarios
-
Residential & Commercial Plumbing Systems
Use-case: Branch pipeline isolation cut-off for domestic cold-hot-water circuits, for equipment / branch maintenance without shutting down whole building water-supply. Project value: Bi-directional full-bore design, low pressure-loss when fully open; convenient on-site thread installation.
-
HVAC Heating & Chilled-Water Hydronic Systems
Use-case: Isolation shut-off for radiator loops, floor-heating branches and chilled-water auxiliary pipelines. Project value: Matches glycol anti-freeze medium; reliable metal hard-seal for repeated maintenance cut-off operations.
General-Purpose Neutral-Medium Industrial Auxiliary Piping
Use-case: Cut-off valve for non-corrosive water-based auxiliary pipelines in general industry. Project value: Forged brass body provides good mechanical strength for medium-pressure neutral-medium circuits.
Application exclusion: Standard HPb59-1 brass variant shall NOT be deployed for strong-corrosion chemical, petrochemical process-fluid, ammonia, high-chloride brine. These applications require customized stainless-steel material solution.
Installation Guide
-
Pre-Installation Check
- Confirm valve DN-size and thread-spec match pipeline thread port.
- Inspect forged brass valve-body, handwheel, stem, gate-plate and stem-packing; reject cracked, deformed or damaged components.
- Clean pipeline thread surfaces, remove burr, welding slag and old sealing-residue; prepare qualified PTFE-tape.
- Flush pipeline thoroughly before valve mounting; solid particles / scale will scratch metal hard-sealing faces and cause internal leakage.
-
Installation Steps
- Wind PTFE-tape 3-5 clockwise-turns on mating pipeline thread port.
- Screw gate valve into pipeline; apply wrench torque only on valve-body hex flats. Do NOT apply wrench force onto red plastic handwheel or bonnet, to avoid stem assembly damage.
- After mechanical installation completed, rotate handwheel to test complete full-open-to-full-close stroke; verify gate-plate lifts / descends smoothly without jamming.
- Fill system with water and perform pressure-testing; inspect thread-joint and stem-packing gland position for external leakage.
- Commissioning: Set valve either fully-open or fully-closed position. Avoid leaving valve at partial-opening state after commissioning.
-
Important Installation Notes
- Installation recommended for qualified plumbing / HVAC technicians.
- Strictly use valve for full-open / full-close isolation only; prohibit long-term half-open throttling-regulation. Short-time partial-opening only for flushing / test, then restore to full-open / full-closed.
- Pipeline must be flushed prior to putting valve into service; solid impurities scratch metal hard-sealing-pair and cause permanent internal-leakage.
- Do not wrench-tighten handwheel and bonnet; risk stem bending and packing leakage.
- Standard brass model is limited to neutral non-corrosive medium; corrosive fluid requires custom material.
Maintenance & Troubleshooting
|
Phenomenon |
Probable Root-Cause |
Recommended Solution |
|
Thread-joint external leakage |
Insufficient PTFE-tape; scratched mating-thread |
Disassemble joint; re-apply brand-new PTFE-tape; replace valve if thread is damaged |
|
Stem-packing gland seepage |
Ageing / compression-relaxed stem packing |
Isolate system pressure; re-tighten gland nut moderately or replace stem-packing spare-parts |
|
Handwheel rotation stiff / jamming |
Scale, solid debris entering valve-body cavity; stem thread corrosion |
Flush pipeline; disassemble bonnet assembly; clean stem-thread and gate-plate moving surface; apply water-system compatible lubricant |
|
Valve cannot achieve tight shut-off (internal leakage) |
Solid particle wedged between gate-plate & valve-seat; metal sealing-faces scratched due to past long-term half-open throttling |
Disassemble valve; clean sealing-pair; if sealing-surfaces are permanently scratched, complete valve replacement is required |
Routine-Maintenance Suggestion
- Visual inspection for thread-joint and stem-gland external leakage: Quarterly during system operating-season
- Execute full-stroke full-open-full-close operation once per year before system startup, prevent scale seizure of moving components
- Replace aged stem-packing upon stem-position seepage failure: As-required
- If metal hard-sealing-pair gets scratched and internal-leakage occurs: whole valve replacement is recommended, on-site re-grinding is difficult for small-size threaded brass gate-valve.
Purchase Considerations
When purchasing brass hard-sealed gate valve: confirm DN-size, thread-spec, PN16 pressure-rating. Clarify project requirement: this valve is for full-open / full-close isolation cut-off, NOT for continuous flow-throttling regulation. Medium must be neutral non-corrosive water / glycol; corrosive media need stainless-steel custom variant. If partial-opening flow-regulation is required, select globe valve instead of gate valve.
FAQ
Q: What will happen if I keep gate-valve half-open for months to adjust flow?
A: High-velocity medium continuously scours metal-to-metal hard-sealing surfaces, producing scratches and indentations. Later when you try to fully close the valve, it cannot shut-off tightly and suffers permanent internal-leakage; the valve will need replacement.
Q: Can this gate-valve be used for steam?
A: Standard-model is 5-90℃ liquid-phase neutral water/glycol. Steam application needs special high-temperature resistant packing and material customization.
Q: Can I repair scratched internal hard-sealing surfaces on-site?
A: For small-size threaded DN15-DN50 brass gate-valve, on-site re-grinding sealing-pair is not practical. Once metal sealing-faces are scratched, whole-valve replacement is the recommended solution.
Products Summary
Yuanlun brass hard-sealed gate valve is PN16 manual isolation cut-off valve, DN15-DN50 size-range. Adopts one-piece forged HPb59-1 brass body, metal-to-metal hard-sealing gate-plate and valve-seat pair, full-bore bi-directional flow-passage. Designed exclusively for full-open / full-close pipeline isolation cut-off; long-term partial-opening throttling-regulation is forbidden to avoid hard-seal damage. Suitable for neutral non-corrosive hot-cold water and glycol anti-freeze medium, widely-applied in building plumbing, HVAC heating-chilled-water and general-purpose neutral-medium auxiliary piping-systems. Sample-order supported for pre-project-evaluation, 15-day standard lead-time for worldwide plumbing-HVAC distributors and engineering-contractors.
Factory Information
Zhejiang Yuanlun Valve Co., Ltd. was founded in 2006, formerly known as Yuhuan Guohong Valve Co., Ltd. It is located in Yuhuan, Zhejiang Province, known as the "Valve Capital of China". After nearly two decades of stable development, Yuanlun Valve is a professional manufacturer for HVAC valves integrating R&D, production and sales. Our product portfolio covers floor heating systems, air-conditioning systems, domestic water valves, including ball valves, thermostatic valves, manifolds, check valves, stop valves, filter valves, angle valves, pipe fittings, corrugated pipes and other series.
Hot Tags: brass hard-sealed gate valve, China brass hard-sealed gate valve manufacturers, suppliers, factory, Magnetic Lock Gate Valve, Brass Hard-sealed Gate Valve
