1620Angle Ferrule Internal Thread Ball Valve
Ferrule-Compression Angle Ball Valve vs Ordinary Thread-Only Angle Ball Valve
Conventional thread-only angle ball-valve needs extra transition adapters when connecting aluminium-plastic composite pipes. Additional threaded joints increase potential leakage-points and raise installation workload for retro-fit projects.
1620 angle ferrule internal-thread ball-valve integrates ferrule compression connection for 16×20 aluminium-plastic pipe plus female-thread port within one 90-degree angle-body. It omits extra adapters, realising fast tool-free pipe connection while reserving threaded interface for mating standard threaded fittings.
|
Item |
Ordinary Thread-Only Angle Ball Valve + Transition Adapter |
1620 Angle Ferrule Internal Thread Ball Valve (This Product) |
|
Aluminium-plastic pipe connection |
Requires extra compression-adapter |
Integrated 16×20 ferrule-compression end |
|
Quantity of intermediate fittings |
Extra adapter needed |
Single integrated valve-body |
|
Threaded joints |
More |
Reduced |
|
Installation for renovation projects |
Cumbersome |
Fast assembly |
|
Interface type |
Thread-only |
Ferrule-compression + female-thread composite |
Product Overview
Yuanlun 1620 angle ferrule internal-thread ball-valve is 90-degree angle-pattern quarter-turn shut-off valve. One side adopts ferrule-compression connection specially for 16×20 aluminium-plastic composite pipe, the other side is female internal-thread interface (G1/2, NPT1/2 optional).
Chrome-plated / hardened ball-core, PTFE / PEEK elastic valve-seat materials. It achieves reliable sealing under medium-to-high pressure, adapts renovation-project field installation without welding or complex threading operation. Full-bore flow-passage lowers hydraulic resistance, suitable for water, heating-circulating-water, non-corrosive-medium piping-systems.
Important note: Installation recommended to be completed by qualified plumbing technicians. Ferrule-compression nut torque must follow specification; over-tightening will damage aluminium-plastic pipe outer wall.
Key Advantages
-
Space-Saving 90-Degree Angled Body Design
Built-in 90-degree flow-turn passage, minimises occupied installation-space, optimises pipeline layout for corner-mounted and confined cabinet-installation scenarios.
-
Flexible Dual-Interface Quick-Connection
Combines ferrule-compression joint for 16×20 aluminium-plastic pipe and female-thread port. Enables welding-free / thread-free assembly for existing-system retrofitting and routine maintenance work.
-
Dual-Layer Sealing Reliability
Two independent sealing-systems: elastic ball-to-seat soft-seal for valve internal shut-off; metal-ferrule mechanical compression seal at pipe-connection end. Provides redundant anti-leakage protection under high-pressure and temperature-cycling conditions.
-
Full-Bore Low-Resistance Flow Channel
Full-bore ball-core passage matches nominal pipe-size, minimises pressure-drop and reduces impurity sediment accumulation inside valve-cavity.
-
Ergonomic Low-Torque Operation
Light-weight lever-handle requires low operating torque. Handle position gives clear visual open-closed-status indication to prevent mis-operation on-site.

Specifications
|
Feature |
Description |
|
Place of origin |
China |
|
Brand name |
Yunnl |
|
Product Name |
1620 Angle Ferrule Internal Thread Ball Valve |
|
Body Material |
Hot-forged brass (to confirm alloy grade) |
|
Ball Core |
Chrome-plated / hardened brass ball-core |
|
Seat Material |
PTFE / PEEK elastic valve-seat |
|
Connection End A |
Ferrule-compression for 16×20 aluminium-plastic composite pipe |
|
Connection End B |
Female-thread G1/2 as standard; NPT1/2 customizable |
|
Nominal Pressure |
PN16 (1.6 MPa) |
|
Working Temperature |
5℃ ~ 90℃ |
|
Applicable Medium |
Cold-hot water, heating circulating-water, other non-corrosive liquids |
|
Operation Mode |
Manual 90-degree quarter-turn lever-handle |
|
Size |
DN15-DN50 |
|
Minimum Order Quantity |
1 |
|
Price |
Negotiable |
|
Packing |
Yuanlun standard packing |
|
Payment Terms |
L/C, D/A, D/P, T/T, Western Union, MoneyGram |
|
Delivery Time |
15 Days |
Working Principle
-
Main Components & Function
|
Component |
Core Function |
|
Lever-handle |
90-degree quarter-turn manual operation; visual open-closed-status indication |
|
Valve stem |
Transmit rotary torque to internal ball-core |
|
Chrome-plated ball-core |
Full-bore through-hole component for fluid conduction / shut-off |
|
PTFE / PEEK valve-seat |
Elastic soft-seal for bubble-tight ball-valve shut-off |
|
Ferrule-compression assembly (nut + metal ferrule) |
Mechanical deformation of ferrule creates metal-to-pipe outer-wall sealing for aluminium-plastic pipe |
-
Operating Principle
- Valve Open-Close Logic: Rotate lever-handle 90-degree. Handle parallel to flow-direction = fully-open; handle perpendicular = fully-closed. PTFE/PEEK seat presses against ball-core to achieve shut-off.
- Ferrule-Compression Sealing Logic: Insert properly-cut aluminium-plastic pipe into ferrule-port. Tighten compression-nut, ferrule deforms mechanically and bites into pipe outer-wall, forming reliable mechanical seal at pipe-joint.
- Dual-seal redundant-protection: Valve-internal ball-seat soft-seal and pipe-end ferrule mechanical-seal work independently, improving overall system anti-leakage safety.
Operating reminder: Designed for full-open / full-closed isolation service. Long-term partial-opening throttling will accelerate seat abrasion.
Application Scenarios
-
Underfloor-Heating Pipeline Systems
Use-case: Branch-loop shut-off for floor-heating using 16×20 aluminium-plastic pipes. Project value: Integrated ferrule port directly connects heating pipe, reduces transition-adapter count inside manifold cabinet.
-
Existing-System Renovation & Retrofitting Projects
Use-case: Replacement / re-construction of old plumbing systems with aluminium-plastic composite pipe. Project value: Welding-free, thread-free ferrule-connection, shortens site-retrofit construction-time.
-
Residential Domestic Water-Supply Pipelines
Use-case: Shut-off joints for indoor water-supply using 16×20 aluminium-plastic pipe. Project value: Composite-interface design adapts mixed-layout of aluminium-plastic pipe and standard threaded fittings.
-
Light-Industrial Non-Corrosive Fluid Circuits
Use-case: Auxiliary shut-off for low-pressure non-corrosive-liquid piping with composite-pipe. Project value: Dual-seal mechanism enhances reliability for medium-pressure working-conditions.
Installation Guide
-
Pre-Installation Check
- Confirm valve specification: 16×20 ferrule-end matches outer-diameter of aluminium-plastic pipe; verify thread-standard (G1/2 / NPT1/2).
- Manually rotate lever-handle to confirm smooth 90-degree open-close stroke without jamming.
- Cut aluminium-plastic pipe squarely, completely remove burrs and sharp edges at pipe-end. Damaged / oval-deformed pipe-ends cannot be used.
-
Installation Steps
- Disassemble compression-nut and metal ferrule from ferrule-port. Slide nut and ferrule onto aluminium-plastic pipe in correct sequence.
- Fully insert pipe-end into valve ferrule-port until it reaches internal pipe-stop shoulder.
- Hand-tight compression-nut first; then apply wrench with limited additional torque. Do NOT over-tighten; excessive torque will crack or cut aluminium-plastic pipe outer-wall.
- Wind PTFE-tape 3-5 clockwise turns on female-thread mating male-thread fitting. Tighten on valve-body flats; do NOT apply torque onto lever-handle.
- Reserve sufficient clearance for lever-handle full-range 90-degree rotation.
- Complete assembly, slowly pressurize system and perform leakage inspection for ferrule-joint and threaded-joint.
-
Important Installation Notes
- Installation recommended for qualified plumbing technicians.
- Strictly control ferrule-nut tightening torque; over-tightening destroys aluminium-plastic composite-pipe.
- Not suitable for long-term partial-opening throttling service.
- Pipe-end must be square and burr-free; burr will damage ferrule sealing-performance.
Maintenance & Troubleshooting
|
Phenomenon |
Probable Root-Cause |
Recommended Solution |
|
Ferrule-compression joint leaks |
Pipe-end burr / deformation; insufficient nut torque; worn metal ferrule |
Re-cut pipe-end; retighten compression-nut by specified torque; replace ferrule spare-part |
|
Thread-port joint leakage |
Insufficient PTFE-tape or cross-thread damage |
Re-apply sealing-tape; replace damaged mating fitting |
|
Stem-gap leakage |
Ageing / damage of stem O-ring |
Isolate upstream-downstream pressure, replace stem sealing spare-part |
|
Stiff handle rotation |
Scale / foreign-debris trapped inside valve-cavity |
Flush pipeline medium; disassemble to clean ball-core and PTFE/PEEK seat |
|
Cannot achieve tight shut-off |
Impurity trapped between ball-core and valve-seat |
Disassemble internal cleaning; replace scratched PTFE / PEEK seat |
Routine-Maintenance Suggestion
- Visual inspection for ferrule-joint and thread-joint leakage: Quarterly
- Lever-handle open-close functional test: Annually
- Replace ferrule, PTFE/PEEK seat and stem O-ring upon ageing or leakage failure: As-required
FAQ
Q: Can the metal ferrule be reused after disassembly?
A: After ferrule is compressed and deformed, reuse is not recommended. Install new ferrule spare-part for reassembly to guarantee sealing-reliability.
Q: Can this valve work for steam-medium?
A: Not for steam-service. Designed for liquid-phase cold-hot-water and non-corrosive-liquid within 5-90℃.
Q: Can I replace PTFE / PEEK seat and ferrule spare-parts on-site?
A: Isolate upstream-and-downstream pipeline pressure first before disassembly; corresponding spare-parts are available for bulk-order projects.
Products Summary
Yuanlun 1620 angle ferrule internal-thread ball-valve integrates 16×20 aluminium-plastic-pipe ferrule-compression joint and female-thread port within one 90-degree angle-body. PN16 pressure-rating, PTFE / PEEK valve-seat material, dual-redundant sealing-structure. It supports welding-free quick installation, widely-applied for floor-heating loops, plumbing renovation-retrofit, domestic water-supply and light-industrial non-corrosive-liquid piping-systems. Sample-order supported for pre-project-evaluation, 15-day standard lead-time for worldwide plumbing-HVAC distributors and engineering-contractors.
Factory Information
Zhejiang Yuanlun Valve Co., Ltd. was founded in 2006, formerly known as Yuhuan Guohong Valve Co., Ltd. It is located in Yuhuan, Zhejiang Province, known as the "Valve Capital of China". After nearly two decades of stable development, Yuanlun Valve is a professional manufacturer for HVAC valves integrating R&D, production and sales. Our product portfolio covers floor heating systems, air-conditioning systems, domestic water valves, including ball valves, thermostatic valves, manifolds, check valves, stop valves, filter valves, angle valves, pipe fittings, corrugated pipes and other series.
Hot Tags: 1620angle ferrule internal thread ball valve, China 1620angle ferrule internal thread ball valve manufacturers, suppliers, factory, 1216Angle Ferrule Ball Valve, card sleeve type ball valve

