Brass Filter Ball Valve

Brass Filter Ball Valve

Details
Place of origin: China
Brand name: Yunnl
Product Name:Brass filter ball valve
Size:DN15-DN50
Minimum Order Quantity: 1
Price: Negotiable
Packing:Yunnl standard packing
Payment Terms: L/C, D/A, D/P, T/T, Western Union,MoneyGram
Delivery Time:15 Days
Applicable temperature: 5℃ to 90℃
Category
Brass Ball Valve
 
Send Inquiry
Description
Technical Parameters

Brass Filter Ball Valve

 

Two Components, One Valve

In plumbing and heating systems, flow control and debris filtration are often handled by two separate components: a shut‑off ball valve and a Y‑strainer. This approach creates unnecessary costs and risks.

Comparison Separate Valve + Strainer Yunnl Filter Ball Valve (This Product)
Number of fittings 2 1
Threaded joints 4 2
Potential leak points 4 2
Installation time (DN25) ~12 minutes ~6 minutes
Total cost (valves + labor) 100% ~60-70%
Maintenance Close valve, remove strainer, clean, re‑seal 2 joints Close valve, remove screen, clean, reinsert

One component. Half the joints. Half the installation time.

The Yunnl brass filter ball valve integrates a quarter‑turn ball valve with a removable Y‑type strainer screen in a single forged brass body. It protects downstream equipment-pumps, heat exchangers, manifold valves-from sand, scale, and pipe debris, without the extra connections and labor of separate components.

 

Product Overview

Yunnl brass filter ball valve is an integrated piping component that combines a quarter‑turn shut‑off ball valve with a removable Y‑type strainer screen. It is designed for building water, HVAC and light‑industrial systems where both flow control and particle filtration are required at the same pipeline location.

The forged HPb59-1 brass body provides corrosion resistance and mechanical strength for long‑term service under hot‑water and heating conditions. Inside the Y‑shaped cavity, a stainless steel 304 filter screen captures sand, scale, pipe debris and other solid particles. The ball valve on the inlet side allows the installer or facility manager to isolate the filter screen for cleaning without draining the entire piping system.

Available sizes: DN15, DN20, DN25, DN32, DN40, DN50
Standard filtration range: 50µm to 500µm (mesh size customizable)
Pressure rating: PN16 (1.6 MPa)

 

How the Filter Ball Valve Works

  • Two Functions, One Component

Function 1 – Shut‑Off (Ball Valve)

  1. Lever handle rotates 90°
  2. Handle parallel to pipe = OPEN
  3. Handle perpendicular to pipe = CLOSED
  4. PTFE seats provide bubble‑tight shut‑off

Function 2 – Filtration (Y‑Strainer)

  1. 304 stainless steel screen captures debris
  2. Particles collect in the Y‑shaped cavity
  3. Screen is removable, cleanable, and reusable
  4. No replacement cartridges required
  • The Flow Path

  1. Water enters the inlet port
  2. Passes through the 304SS filter screen
  3. Debris is trapped on the screen surface
  4. Clean water exits through the outlet port
  5. Sediment collects in the Y‑branch chamber

 

Core Advantages

  • Single Component – Fewer Leak Points

Integrating valve and strainer in one body reduces threaded joints by 50%. Fewer joints = fewer potential leak points.

  • Reusable 304 Stainless Steel Screen

The filter screen is not a consumable. Remove, rinse, brush clean, and reinstall indefinitely. No ongoing filter element replacement costs.

  • Class A Zero‑Leakage Shut‑Off

PTFE seats and chrome‑plated ball core achieve bubble‑tight sealing in the closed position. Factory tested at 1.76 MPa.

  • 50,000 Cycle Service Life

Tested to 50,000 full open‑close cycles at rated pressure-equivalent to 5+ years of daily commercial operation.

  • Tool‑Free Screen Access (Selected Models)

On Y‑body and bottom‑drain configurations, the screen is accessible with a standard wrench. No specialized extraction tools needed.

  • 90° Quick Shut‑Off

The lever handle provides instant visual confirmation: parallel to pipe = open, perpendicular = closed.

 

The Integrated Advantage: Quantified

Metric Separate Ball Valve + Y‑Strainer Yunnl Integrated Filter Ball Valve Improvement
Fittings required 2 1 50% fewer
Threaded joints 4 2 50% fewer leak points
Installation time (DN25) ~12 minutes ~6 minutes 50% faster
Total cost (valves + labor) 100% ~60‑70% 30‑40% savings
Maintenance steps Close valve, remove strainer, clean, reinstall (plus re‑seal 2 extra joints) Close integral valve, remove screen, clean, reinstall Fewer steps, no extra joint re‑sealing

 

5555

 

 

 

 

 

 

 

 

 

 

 

 

 

551

 

Technical Parameter Comparison (Taking DN25 Model as an Example)

Feature Yunnl Filter Ball Valve Standard Ball Valve
Particle filtration Yes – 304SS screen, 50‑500µm No – passes all debris downstream
Shut‑off function Yes – full bore closure Yes
Maintenance Cleanable/replaceable screen None – but debris passes through to downstream equipment
Equipment protection Protects pumps, valves, heat exchangers Does not protect downstream equipment
Installation space One fitting Requires separate ball valve + Y‑strainer
Leak points 2 threaded joints 4 threaded joints (valve + strainer)
Long‑term cost Lower (one component, reusable screen) Higher (two components, plus downstream damage risk)

 

Material Composition & Build Details

Component Material Rationale
Valve Body Forged HPb59-1 brass (lead‑containing free‑cutting brass) Corrosion resistance, machinability, pressure integrity
Ball Core Chrome‑plated brass Low friction, corrosion resistance, smooth 90° operation
Filter Screen 304 Stainless Steel Corrosion resistance, strength, cleanable, reusable
Screen Mesh 50‑500µm aperture (40‑200 mesh) Customizable to system particle size requirements
Seats PTFE (Teflon) Low friction, temperature stable, zero‑leak sealing
Stem Seals EPDM O‑rings Hot‑water compatible, chemical resistance, long seal life
Body Finish Electroplated / Nickel‑plated Surface corrosion protection, aesthetic finish

 

 

Specifications
Feature Description

Place of origin

China

Brand name

Yunnl

Product Name

Leak detection electric ball valve

Body Material Forged HPb59‑1 brass
Ball Core Chrome‑plated brass
Filter Screen 304 Stainless Steel
Screen Mesh 50‑500µm aperture (customizable)
Seat Material PTFE
Seal Material EPDM O‑rings
Thread Standard BSP (standard), NPT (on request)
Nominal Pressure PN16 (1.6 MPa)
Working Temperature 5°C ~ 90°C
Shut‑Off Leakage Class A (ISO 5208) – zero leakage
Operation Manual lever handle, 90° quarter‑turn
Service Life ≥50,000 cycles
Applicable Medium Water, heating water, glycol mixtures, non‑corrosive fluids

Size

DN15-DN50

Minimum Order Quantity

1

Price

Negotiable

Packing

Yunnl standard packing

Payment Terms

L/C, D/A, D/P, T/T, Western Union,MoneyGram

Delivery Time

15 Days

 

Filter Screen Selection Guide

System Condition Recommended Mesh Filtration Accuracy Flushing Frequency
New installation 40‑60 mesh ~250‑400μm Weekly (first month)
Clean municipal water 80‑100 mesh ~150‑180μm Every 6‑12 months
Well water / moderate debris 60‑80 mesh ~180‑250μm Every 3‑6 months
Older system / heavy debris 40‑60 mesh ~250‑400μm Monthly
Sensitive equipment protection 100‑200 mesh ~75‑150μm As needed

 

Application Scenarios

  • Underfloor Heating Manifold Inlet Protection

Installation: At the manifold inlet.
Value: Captures pipe scale, joint compound, and sand that could block small‑bore heating tubes. The shut‑off function allows manifold isolation for servicing.

  • Boiler and Heat Pump Loop Protection

Installation: On the return line, before the heat source.
Value: Protects pumps, heat exchangers, and control valves from particulate damage.

  • Water Supply Branch Isolation

Installation: On fixture supply lines.
Value: Provides both shut‑off and debris protection for washing machines, dishwashers, and water heaters.

  • Process Cooling and Chilled Water Systems

Installation: On cooling water supply lines.
Value: Removes corrosion by‑products and biological debris, preventing fouling of chiller tubes and fan coil units.

  • Solar Thermal and Heating Retrofit

Installation: On older heating systems being refitted.

Value: Captures accumulated pipe debris during system cleaning, preventing it from entering new equipment.

 

Installation & Maintenance

  • Installation

  1. Confirm flow direction – Arrow on body indicates flow. Y‑strainer cavity must point downward or at a downward angle.
  2. Check screen mesh – Verify installed screen matches system particle size requirements.
  3. Apply PTFE tape – 3‑4 turns clockwise on male pipe threads.
  4. Thread the valve – Hand‑thread, then tighten with wrench on body flats. Do not apply torque to lever handle or strainer cap.
  5. Verify operation – Rotate handle 90° through full range.
  • Maintenance

Routine Flushing (Bottom Drain Models)

  1. Close the ball valve
  2. Open the bottom drain plug
  3. Allow system pressure to flush accumulated sediment
  4. Close the drain plug
  5. Re‑open the valve

Full Screen Cleaning (Y‑Body Models)

  1. Close the ball valve and depressurize
  2. Unscrew the Y‑body cap
  3. Remove the 304SS screen
  4. Rinse under clean water; use a soft brush
  5. Reinsert the screen
  6. Replace the cap gasket if worn
  7. Reopen the valve and test

Recommended Cleaning Frequency

Water Quality Flushing Screen Removal Cleaning
Clean Every 12 months Every 24 months
Average Every 6 months Every 12 months
Poor Monthly Every 3 months

 

FAQ

Q: What is the difference between a filter ball valve and a Y‑strainer?

A: A Y‑strainer is a filtration component only-it does not have a shut‑off valve. A filter ball valve integrates both functions: the ball valve isolates the strainer for cleaning, and the strainer removes particles from the flow. This eliminates the need for a separate upstream shut‑off valve.

Q: What is the standard mesh size, and can I customize it?

A: Standard mesh is 80‑120 mesh (approximately 125‑180µm). We offer screen mesh from 40 mesh (500µm) down to 200 mesh (50µm). Specify your particle size requirement when ordering.

Q: How do I know when to clean the screen?

A: Monitor the system pressure before and after the valve. A pressure drop of 0.1‑0.2 MPa (1‑2 bar) above normal indicates the screen is partially blocked and requires cleaning. Some installers schedule cleaning during routine seasonal maintenance.

Q: Can this valve be installed on the return line as well as the supply line?

A: Yes. It can be installed on either line. On the supply (flow) line, it protects the heating circuit. On the return line, it protects the boiler or heat source from debris circulating back.

Q: Is the screen reusable?

A: Yes. The 304 stainless steel screen is designed for repeated cleaning and re‑use. It is not a disposable filter media. Only replace it if physically damaged or severely corroded.

Q: What is the maximum operating temperature?

A: Continuous operating temperature is 5°C to 90°C. Short‑term peak temperature up to 110°C is acceptable for heating system purge cycles, but continuous operation above 90°C will reduce EPDM seal life.

Q: What does "Class A leakage" mean?

A: Class A (ISO 5208) is the highest leakage classification for shut‑off valves. It means zero visible leakage during the specified pressure test period-i.e., bubble‑tight shut‑off.

Q: Can I order a sample for testing?

A: Yes. Minimum order quantity is 1 unit for sample evaluation. We recommend ordering the size and mesh type that matches your intended application.

Q: Do you offer electric or pneumatic actuated versions of this filter ball valve?

A: We offer electric and pneumatic actuators as optional upgrades for remote or automated control. These versions retain the same filter ball valve body and strainer function. Contact our sales team for actuator selection guidance.

 

Quality Assurance

  • 100% factory pressure‑tightness test – 1.5× rated pressure
  • 100% seat leakage test – zero leakage
  • 100% screen inspection – mesh integrity verified
  • Material certification – spectrographic analysis available
  • ISO 9001 certified facility

 

Products Summary

Yunnl brass filter ball valve combines shut‑off and Y‑strainer filtration in a single forged brass body. It protects downstream equipment-pumps, heat exchangers, manifold valves and floor heating pipes-from sand, scale, debris and pipe‑joint residue. Available DN15‑DN50 with 304 stainless steel filter screens from 50‑500µm, PTFE seats, EPDM seals and PN16 rating, this integrated valve reduces installation time, leak points and long‑term maintenance cost compared to separate valve‑and‑strainer installations. Sample support, 15‑day delivery and flexible global payment terms available for distributors and contractors worldwide.

 

Hot Tags: brass filter ball valve, China brass filter ball valve manufacturers, suppliers, factory, pex ball valves, Brass Filter Ball Valve, 2 pex ball valve, 1 2 pex brass ball valve, High-stem brass ball valve, MF Brass Ball Valve

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!