Forged Integrated Ball Valve Floor Heating Manifold
The Manifold That Can't Leak
Most heating manifolds are assembled from multiple parts. They have internal seams, welded joints, and threaded connections. Each seam is a potential leak point.
The forged integrated manifold has no internal seams. It is hot-forged from a single brass billet - one piece, no welds, no seams.
- No hidden leakage paths
- No seams to crack under thermal cycling
- No weld failures
This is the core advantage of the forged integrated manifold.
| Assembled Manifold | Forged Integrated (This Product) |
|---|---|
| Multiple pieces joined | One continuous piece |
| Internal seams | No internal seams |
| Welded joints | No welding |
| Multiple leak paths | No hidden leak paths |
| Seams can crack over time | Single-piece integrity |
| Higher leak risk | Lower leak risk |
Product Overview
Yunnl forged integrated ball valve manifold is a one-piece forged brass hydronic distribution manifold for underfloor radiant heating systems. The assembly combines supply and return bars with integrated brass ball valves on each circuit - all forged from a single brass billet.
Available in DN25 (1″) and DN32 (1‑1/4″) main pipe sizes, with circuit counts from 1 to 8 ways (9+ ways freely splicable).
One‑Piece Forging vs. Assembled Construction
-
Assembled Manifold (Traditional)
- Multiple components welded or brazed together
- Internal seams at every joint
- Seams are potential leak paths
- Thermal cycling stresses the joints
- More components = more failure points
-
Forged Integrated (This Product)
- Single piece of brass - no seams
- Continuous grain structure
- No internal leak paths
- Uniform strength throughout
- One piece = maximum reliability
-
Why Forging Matters
| Feature | Cast Brass | Forged Brass (This Product) |
|---|---|---|
| Internal voids | Possible (porosity) | None |
| Grain structure | Random | Uniform, directional |
| Strength | Lower | Higher |
| Pressure resistance | Moderate | Excellent |
| Leak risk | Higher | Lower |
| Thermal cycling | Seam stress | Seamless |
Key Product Advantages
-
One‑Piece Forged Construction
No internal seams, no welded joints, no hidden leakage paths. The manifold is forged from a single brass billet - maximum reliability.
-
Integrated Ball Valves per Circuit
Each circuit has a built-in brass ball valve. 90° lever operation provides quarter-turn on/off isolation per circuit.
-
1.8mm Wall Thickness
Thicker than standard manifolds, providing enhanced pressure resistance and durability under thermal cycling.
-
360° Rotatable Automatic Exhaust Valve
Plug‑type exhaust valve mounts on top. Rotates 360° for easy installation in tight manifold cabinets. Automatically releases trapped air.
-
Full‑Bore Flow Path
No flow restriction in the open position. Minimal pressure drop across the manifold.
-
Flexible Circuit Splicing
1‑8 ways standard; 9+ ways splicable via modular connectors. Suitable for small apartments to large villas.
-
45mm Center‑to‑Center Spacing
Compact spacing reduces manifold cabinet size - fits standard manifold cabinets.
-
Multi‑Layer Electroplating
Corrosion‑resistant finish for humid boiler room environments. Maintains appearance over years of service.





| Feature | Description |
|
Place of origin |
China |
|
Brand name |
Yunnl |
|
Product Name |
Forged Integrated Ball Valve Floor Heating Manifold |
| Circuit Count | 1‑8 ways standard; 9+ ways free splicing |
| Valve Type | Integrated brass ball valve per circuit |
| Body Material | Hot‑forged brass |
| Surface Treatment | Multi‑layer electroplating + passivation |
| Wall Thickness | 1.8 mm |
| Center‑to‑Center Spacing | 45 mm |
| Exhaust Valve | 360° rotatable plug‑type automatic air vent |
| Connection Options | Ø20 / Ø16 quick‑connect fittings (PEX / PE‑RT compatible) |
| Nominal Pressure | PN16 (1.6 MPa) |
| Working Temperature | 5°C ~ 95°C |
| Applicable Medium | Hot water, water‑glycol heating fluid |
|
Size |
DN25,DN32 |
|
Minimum Order Quantity |
1 |
|
Price |
Negotiable |
|
Packing |
Yunnl standard packing |
|
Payment Terms |
L/C, D/A, D/P, T/T, Western Union,MoneyGram |
|
Delivery Time |
15 Days |
How the Manifold Works
Supply Manifold (Upper Bar)
Hot water from the boiler enters the supply manifold. The integrated ball valves on each outlet split the flow into independent circuits. Each valve has a 90° lever handle - open or close with a quarter-turn.
90° operation: Ball valves provide quarter-turn on/off isolation. Handle position indicates circuit status directly.
Floor Pipe Circulation
Hot water travels through underfloor PEX or PE-RT pipes, releasing heat into the room. Cooled water returns to the return manifold.
Return Manifold (Lower Bar)
Return water collects in the lower bar and flows back to the heat source. The automatic exhaust valve continuously releases trapped air, preventing air locks.
Flow Control
Each circuit's ball valve allows independent flow adjustment. Circuits with higher heat demand can be fully open; smaller or warmer zones can be partially closed.
Ball Valve vs. Other Valve Types
| Feature | Ball Valve (This Manifold) | Regulating Valve |
|---|---|---|
| Operation | 90° lever | Multiple turns |
| Speed | Instant | Gradual |
| Flow control | On/off with some adjustment | Precise adjustment |
| Torque | Low | Moderate |
| Maintenance | Low | Low |
| Best for | Zone on/off control | Precision balancing |
Application Scenarios
-
Residential Underfloor Heating
Application: Apartments, villas, multi-story residential buildings.
Circuit count: 2-8 ways depending on building size.
Value: Zone-by-zone isolation. 90° lever operation per circuit.
-
Light‑Commercial Radiant Heating
Use case: Offices, retail stores, guesthouses, boutique hotels.
Circuit count: 4‑12 ways (spliced if needed).
Value: Individual zone control for different rooms or tenants.
-
Heating Retrofit Projects
Use case: Replacing outdated or leaking manifolds.
Circuit count: Match existing circuit count.
Value: Upgraded to forged integrated construction for higher reliability.
-
Multi‑Zone Apartments
Use case: Individual room temperature control in apartment buildings.
Circuit count: 1‑4 ways per apartment.
Value: Each apartment has its own manifold. Independent zone control.
Installation Guide
-
Installation Tips
- Mount the manifold - Horizontally inside a wall‑mounted cabinet using supplied brackets
- Connect supply - Supply manifold to boiler outlet
- Connect return - Return manifold to boiler inlet
- Use PTFE tape - For all threaded connections to ensure leak‑free joints
- Leave clearance - Space around exhaust valve and ball‑valve levers for operation
- Flush before connecting - Flush the entire heating system to remove debris
-
Routine Maintenance
| Task | Frequency |
|---|---|
| Inspect exhaust valve operation | Twice per heating season |
| Check ball‑valve levers for smooth operation | Annually |
| Clean manifold surface | As needed |
| Internal disassembly | Not required under normal conditions |
FAQ
Q: What is the main advantage of forged integrated manifold vs. assembled manifold?
A: Forged construction eliminates internal weld seams and braze joints, significantly reducing hidden leakage risks. It also offers higher mechanical strength and better resistance to thermal fatigue compared to assembled brass or cast‑iron manifolds.
Q: Can this manifold be used for chilled‑water radiant cooling?
A: Yes, the forged brass body and EPDM seals are compatible with chilled water and glycol‑mixed cooling fluid, provided insulation against condensation is applied.
Q: What pipe sizes are compatible?
A: The manifold supports Ø16 and Ø20 PEX / PE‑RT pipes via optional quick‑connect fittings. Main pipe connections are DN25 (1") and DN32 (1‑1/4") threaded.
Q: How many circuits do I need for my project?
A: Typically one circuit per room or heating zone. For 9‑way or more, we provide modular splicing connectors for field assembly.
Q: Are samples available for testing?
A: Yes, MOQ is 1 unit. We support sample orders for dimension, material and performance verification before bulk procurement.
Q: What is the delivery time?
A: 15 working days after deposit confirmation. Expedited shipping available upon request.
Q: Is custom marking available on the manifold body?
A: Yes, for large‑volume project orders, we support custom logo engraving on the main bars.
Ordering & Wholesale Information
For plumbing distributors, HVAC contractors, heating system integrators and building project purchasers:
Sample Order: 1 unit minimum, available for quality and dimension verification
Bulk Orders: Competitive pricing, flexible payment terms
Customization: Circuit count, marking, packaging, and finish
Technical Support: Engineering team available for system design consultation
Shipping: 15‑day lead time, global express and sea freight options
Why Choose Yunnl Forged Manifold?
| Customer Priority | Yunnl Solution |
|---|---|
| Reliability | One‑piece forging, no internal seams, zero leakage track record |
| Ease of installation | Compact 45mm spacing, quick‑connect fittings, rotatable exhaust valve |
| Durability | 1.8mm wall thickness, multi‑layer electroplating, PN16 rating |
| Flexibility | 1‑8 ways standard, 9+ free splicing, optional pipe fittings |
| Service | 1‑unit MOQ, 15‑day delivery, global logistics support |
Products Summary
Yunnl forged integrated ball valve floor heating manifold delivers reliable, space‑saving water distribution for underfloor radiant heating systems. Built from one‑piece forged brass with integrated ball‑valve circuit control, 360° auto exhaust and corrosion‑resistant electroplated finish, it solves common field issues like leakage, uneven heating and difficult installation. Available DN25‑DN32, 1‑8 ways (9+ splices), with sample support and 15‑day global delivery. Specified for heating distributors, installers and project contractors worldwide.
Hot Tags: forged integrated ball valve floor heating manifold, China forged integrated ball valve floor heating manifold manufacturers, suppliers, factory, Intelligent hydronic manifold, tainless steel water distributor, Stainless Steel Manifolds, Intelligent Floor Heating Manifold, Forged Integrated Ball Valve Floor Heating Manifold, Manifold with integrated flowmeter
