Inner Ribbon Elbow

Inner Ribbon Elbow

Details
The female threaded elbow with bracket is a common pipe fitting, mainly used to change the direction and fix the position in the pipeline system, while having the functions of internal thread connection and support installation.
Category
Sliding Fasteners
 
Send Inquiry
Description
Technical Parameters

Inner Ribbon Elbow

 

Inner Ribbon Elbow vs Ordinary Bracket-Free Female-Thread Elbow Comparison

Conventional bracket-free female-thread elbow only realizes pipeline direction-change function. It has no built-in mounting base. All vibration stress and water-hammer impact are entirely borne by threaded joints, which easily causes thread loosening and joint leakage. Additional pipe clamps or brackets are required for fixing.

Inner Ribbon Elbow (female-thread elbow with bracket) integrates 90°/45° elbow flow-direction-change function plus integrated mounting bracket. It can be anchored onto wall / equipment surface by expansion screws. Most pipeline vibration and water-hammer load are absorbed by the bracket, reducing stress on threaded joints, lowering leakage risk, omitting extra separate pipe-clamps for many installation scenarios.

Item

Ordinary Bracket-Free Female-Thread Elbow

Inner Ribbon Elbow (This Product)

Mounting structure

No built-in fixing bracket, need extra pipe-clamps

Integrated mounting-bracket with mounting holes for wall anchoring

Stress-bearing parts

Threaded joints bear all pipeline vibration & water-hammer load

Bracket undertakes most mechanical load; thread joint stress reduced

Auxiliary fixing accessories

Must use separate pipe-clamps / brackets

Only expansion screws required (customer-supplied)

Angle option

90° /45°

90° /45°, custom angles available

Connection mode

Single-end / double-end female-thread

Single-end / double-end female-thread; single-hole / multi-hole base

Typical usage

General suspended pipeline corner transition

Wall-mount / equipment-outlet fixed corner joints

 

Product Overview

Yuanlun Inner Ribbon Elbow is female-thread elbow equipped with integrated mounting bracket. It combines three core functions: pipeline flow-direction redirection, female-thread connection and mechanical support-fixing.

Multiple material options: brass, stainless-steel, PVC; elbow angles include 90°, 45° and customized special angles. Connection supports single-end female-thread or double-end female-thread; mounting-base has single-hole or multi-hole versions. PN16 nominal pressure-rating, working-temperature 5℃-90℃. Widely-used in civil building plumbing, HVAC and various light-industrial piping-systems.

Important note: Installation recommended to be completed by qualified plumbing technicians. Expansion screws are customer-supplied; select fasteners according to wall / substrate material. Hollow thin-wall substrate needs reinforced backing-plate to guarantee bearing-capacity. Thread mating surfaces must use PTFE-tape or sealing gasket to prevent leakage.

 

Advantages

  • Space-Saving Compact Structure Compact overall dimension, well-suited for installation in narrow and limited-space pipeline layouts.
  • Reduced Joint-Leakage Risk Reliable threaded connection plus reinforced mounting-base structure. Effectively restrain joint loosening caused by pipeline shaking and vibration, lower hidden-leakage probability.
  • Convenient Maintenance Performance Fixed-bracket design simplifies disassembly and replacement operations. Components can be serviced without destroying surrounding overall piping-structure.

 

24

 

Specifications

Feature

Description

Place of origin

China

Brand name

Yunnl

Product Name

Inner Ribbon Elbow

Size

DN15-DN50

Elbow Angle

90°,45°, customizable special angles

Thread Form

Single-end female-thread / double-end female-thread

Mounting-Base

Single-hole or multi-hole bracket base

Thread Standard

ISO as default; G-type / NPT customizable

Nominal Pressure

PN16 (1.6 MPa)

Working Temperature

5℃ ~ 90℃

Applicable Medium

Cold-hot-water, non-corrosive liquid / gas (depends on selected material)

Operation Mode

Threaded assembly + bracket fixed by customer-supplied expansion-screws

Minimum Order Quantity

1

Price

Negotiable

Packing

Yuanlun standard packing

Payment Terms

L/C, D/A, D/P, T/T, Western Union, MoneyGram

Delivery Time

15 Days

 

Material and Types

Common Materials:

  • Brass: Good corrosion-resistance, for general water-supply pipeline systems.
  • Stainless steel: High mechanical strength, for high-pressure working-conditions.
  • PVC: Light-weight and rust-proof, suitable for low-pressure corrosive-medium environments.
  • Material selection shall be determined according to transported medium (water, gas, chemical fluid) and system pressure requirements.

Angle Types: 90° (right-angle turn), 45° (gentle-angle turn), other customized angles available.

Connection Methods: Single-end female thread (thread on one end) or double-end female thread (threaded at both ends). The base may feature single-hole or multi-hole design.

 

Working Principle

  • Main Components & Function

Component

Core Function

Elbow main-body

Realize 90°/45° pipeline flow-direction redirection, equipped with female-thread port(s)

Integrated mounting bracket (base)

Pre-drilled mounting holes; transfer pipeline vibration / water-hammer load to wall / substrate via expansion-screws

Female-thread port(s)

Thread-dock with male-thread pipe fittings / valves

Auxiliary sealing parts

PTFE-tape / sealing-gasket, realize static leak-proof sealing for thread joints

  • Operating Principle

  1. Position the elbow bracket base against target mounting surface, fix firmly by customer-supplied expansion-screws. Most of pipeline dynamic mechanical load is transferred to wall/substrate through bracket.
  2. Wind PTFE-tape or install sealing-gasket on mating male-thread components.
  3. Screw male-thread fittings into elbow female-thread port(s), apply moderate torque only on elbow body, avoid applying torque onto bracket lugs.
  4. Thread meshing plus auxiliary sealing materials complete pipeline directional-change connection. Bracket suppresses pipe shaking, reduces stress on thread-joint and lowers leakage risk.
  5. Operating reminder: Bracket only undertakes mechanical supporting function, cannot substitute thread-joint sealing. Expansion-screws are not included in product scope and shall be selected according to substrate condition.

 

Application Scenarios

  • Residential & Commercial Plumbing Systems

Use-case: Wall-mount fixed corner joints for cold-hot-water pipelines. Project value: Built-in bracket fixes elbow onto wall, reduces vibration-induced thread-loosening risk for exposed piping.

  • HVAC Heating-Ventilation-Air-Conditioning Systems

Use-case: Direction-changing connection for heating-loop and air-conditioning circulating-water pipelines. Project value: Multiple-material options adapt different pressure-grade requirements of HVAC projects.

  • Equipment Outlet Docking Scenarios

Use-case: Fixed transition elbow at outlet of water-pumps, valves or water-tank equipment. Project value: Bracket absorbs partial equipment-transmitted vibration, stabilizes pipeline connection state.

  • Light-Industrial Non-Corrosive-Medium Piping

Use-case: Corner transition joints for civil-industrial mixed-use pipeline networks. Project value: Flexible material-selection adapts water, gas and partial chemical-medium working-conditions.

 

Installation Examples

  • Wall Mounting: Fix the base to the wall with expansion screws. Connect the water pipe to the female threaded end, and attach the other side to horizontal or vertical pipes to ensure stable pipeline alignment.
  • Equipment Docking: Use the bracket-equipped elbow at the outlet of pumps, valves, or water tanks to adjust the pipeline direction and reduce vibration effects.

 

Installation Guide

  • Pre-Installation Check

  1. Confirm elbow DN-size, angle, thread-specification, material variant match project design-requirements. Confirm base mounting-hole quantity.
  2. Evaluate wall / mounting-substrate load-bearing capacity; hollow thin-wall needs reinforced backing-plate. Prepare matched customer-supplied expansion-screws.
  3. Inspect elbow body, female-thread and bracket base; reject cracked, deformed or thread-damaged components.
  4. Clean mating male-thread surface, remove burr and old sealing-residue; prepare PTFE-tape or sealing-gasket.
  • Installation Steps

  1. Place bracket-base closely against mounting-surface, mark hole-positions according to base mounting holes. Drill holes and install expansion-anchors.
  2. Fasten elbow base onto substrate with expansion-screws, guarantee base fits flat without gap or tilt.
  3. Wind PTFE-tape 3-5 clockwise-turns on male-thread fitting, or install intact sealing-gasket.
  4. Screw male--thread component into elbow female-thread port. Apply wrench-torque only on elbow-body flats; strictly prohibit applying torque on bracket mounting-lugs.
  5. After assembly completion, slowly pressurize system and inspect thread-joint for leakage.
  • Important Installation Notes

  1. Installation recommended for qualified plumbing technicians.
  2. Expansion-screws are customer-supplied; select fastener type matching actual substrate material.
  3. Never use bracket lugs as force-bearing points for wrench tightening; this may crack base or loosen wall-anchors.
  4. Every disassembly-reassembly needs brand-new PTFE-tape or sealing-gasket.

 

Purchase Considerations

  • Thread specifications: Must match the connected pipe fittings (e.g., G1/2, G3/4, etc.).
  • Pressure-bearing capacity: Select materials and wall thickness according to the system pressure.
  • Environmental adaptability: Choose stainless steel or copper for humid environments, and PVC or special coatings for corrosive media.

 

Maintenance & Troubleshooting

Phenomenon

Probable Root-Cause

Recommended Solution

Thread-joint leakage

Insufficient / missing PTFE-tape; ageing gasket; scratched thread

Disassemble joint; re-apply new PTFE-tape or replace gasket; replace elbow if thread is damaged

Bracket base loose from wall

Ageing / loose expansion-screw; substrate crumbled

Retighten or replace expansion-anchors; reinforce mounting substrate if damaged

Bracket base crack

Wrench torque applied onto bracket lugs

Discard damaged fitting; install brand-new unit and operate correctly

Routine-Maintenance Suggestion

  • Visual inspection for joint leakage and bracket fastening-state: Quarterly
  • Check base anchoring-condition during system overhaul: Annually
  • Replace sealing auxiliary-materials upon re-assembly: As-required

 

FAQ

Q: Can this bracket elbow compensate large scale pipeline thermal expansion displacement?

A: The bracket only provides mechanical fixing support. It cannot absorb large thermal expansion displacement; independent expansion absorbing components need to be configured for large stroke thermal movement.

Q: Can I install directly onto hollow gypsum board wall?

A: Not recommended for direct mounting. Must add reinforced backing plate behind hollow wall to achieve sufficient load bearing capacity.

Q: Can standard brass variant be used for steam medium?

A: Standard brass model is for liquid phase 5-90℃ noncorrosive medium. Steam working condition needs special high temperature resistant sealing and material variant specified when ordering.

 

Products Summary

Yuanlun Inner Ribbon Elbow is multi-functional female-thread elbow with integrated mounting-bracket, PN16 pressure-rating, DN15-DN50 size-range. Supports 90°/45° / custom angles; single-end / double-end female-thread; single-hole / multi-hole mounting-base. Optional brass / stainless-steel / PVC materials. Integrates pipeline redirection, threaded connection and mechanical fixing-support, reduces vibration-caused joint-loosening risk. Widely-applied in civil-commercial plumbing, HVAC equipment-outlet docking and light-industrial piping-systems. Sample-order supported for pre-project-evaluation, 15-day standard lead-time for worldwide plumbing-HVAC distributors and engineering-contractors.

 

Factory Information

Zhejiang Yuanlun Valve Co., Ltd. was founded in 2006, formerly known as Yuhuan Guohong Valve Co., Ltd. It is located in Yuhuan, Zhejiang Province, known as the "Valve Capital of China". After nearly two decades of stable development, Yuanlun Valve is a professional manufacturer for HVAC valves integrating R&D, production and sales. Our product portfolio covers floor heating systems, air-conditioning systems, domestic water valves, including ball valves, thermostatic valves, manifolds, check valves, stop valves, filter valves, angle valves, pipe fittings, corrugated pipes and other series.

 

Hot Tags: inner ribbon elbow, China inner ribbon elbow manufacturers, suppliers, factory, Compression-style equal diameter straight connectorh, pipe fittings, Inner Ribbon Elbow, Equal Diameter Male Threaded Tee Fitting, Equal Diameter Elbow Sliding Fastener, Female Thread Elbow Sliding Fastener

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!