Internal Thread Direct Sliding Fastener

Internal Thread Direct Sliding Fastener

Details
An internal thread straight slip-tight fitting is a type of pipe fitting used for pipeline connections. It combines the characteristics of an internal thread straight fitting and a slip-tight connection. "Internal thread straight" means that one end of the fitting is equipped with internal threads, enabling it to be threadedly connected with pipes or fittings that have external threads.
Category
Sliding Fasteners
 
Send Inquiry
Description
Technical Parameters

Internal Thread Direct Sliding Fastener

 

Internal-Thread Direct Sliding Fastener vs Ordinary Thread-Only Pipe Fitting Comparison

Conventional pure-thread pipe fitting only achieves threaded docking. When connecting plastic, copper or stainless-steel pipes, extra transition adapters or welding procedures are required, bringing more joints and potential leakage-points.

Internal-thread direct sliding fastener integrates one-end female-thread interface and slide-tight compression connection port. It combines threaded connection and slip-tight crimp-type pipe-joining. No welding is required; compatible with multiple pipe materials. It can be disassembled for maintenance without cutting pipes, reducing auxiliary fittings for mixed-material pipeline layout.

Item

Ordinary Thread-Only Pipe Fitting

Internal Thread Direct Sliding Fastener (This Product)

Connection form

Pure threaded connection

Female-thread + slide-tight slip-crimp port

Pipe-material compatibility

Rely on extra adapters

Direct fit for plastic / copper / stainless-steel pipe

Welding requirement

May need welding for metal pipe

Welding-free installation

Disassembly for maintenance

Usually need pipe-cutting

Demountable without cutting pipe

Sealing principle

Thread + external tape/gasket

Dual-seal: slide-ring mechanical compression + elastic-ring deformation seal

Typical usage

Single-material threaded pipelines

Mixed-material pipeline transition points

 

Product Overview

Yuanlun internal-thread direct sliding fastener (slip-tight fitting) is multi-purpose pipeline connector combining female-thread straight fitting and slide-tight connection structure. One-side adopts internal thread for mating male-thread pipe-components; the other side is slide-tight slip-crimp port for plastic pipe, copper pipe or stainless-steel pipe.

Realize dual-sealing by slide-ring mechanical compression and sealing-ring elastic deformation. Welding-free installation, convenient disassembly without pipe-cutting. PN16 nominal pressure-rating, working-temperature 5℃-90℃. Widely-used in building water-supply-drainage, HVAC and light-industrial piping-systems.

Important note: Installation recommended to be completed by qualified plumbing technicians. Must use matched dedicated slide-tight pressing-tool. Pipe-end must be squarely cut and fully deburred; burrs will damage built-in sealing-rings and cause hidden leakage risk.

 

Advantages

  • Simple & Efficient On-Site Installation

Compared with welding and flange-connection solutions, slide-tight fitting installation workflow is much simpler. No welding equipment or complex professional-grade welding-skills are required. Complete assembly via threaded docking plus slide-tight crimp-operation, greatly shortens construction cycle and lowers labour-cost.

  • Dual-Mechanism Reliable Sealing Performance

The slide-tight port forms sealing relying on sealing-ring compressive deformation. Meanwhile the female-thread end provides auxiliary sealing performance. Dual-seal protection guarantees safe and stable operation of the whole piping-system.

  • Good Demountable Maintainability

Benefit from composite structure combining thread and slide-tight slip-crimp joint. During pipeline overhaul or component replacement, the fitting can be disassembled conveniently, without cutting the connected pipe body, protecting existing pipe-work.

  • Broad-Range Pipe-Material Compatibility

Compatible with multiple pipe materials including plastic pipe, copper pipe, stainless-steel pipe, satisfies diversified engineering-project pipeline-connection requirements.

 

21

 

 

Specifications

Feature

Description

Place of origin

China

Brand name

Yunnl

Product Name

Internal Thread Direct Sliding Fastener

Size

DN15-DN50

Sealing Parts

Elastic sealing-ring + slide-tight compression slide-ring

Thread Standard

ISO228 BSP female-thread as standard; NPT customizable

Nominal Pressure

PN16 (1.6 MPa)

Working Temperature

5℃ ~ 90℃

Compatible Pipe Material

Plastic pipe, copper pipe, stainless-steel pipe

Operation Mode

Threaded assembly + dedicated slide-tight tool crimping

Minimum Order Quantity

1

Price

Negotiable

Packing

Yuanlun standard packing

Payment Terms

L/C, D/A, D/P, T/T, Western Union, MoneyGram

Delivery Time

15 Days

 

Working Principle

  • Main Components & Function

Component

Core Function

Fitting main-body

Integrates female-thread end and slide-tight port, provides overall mechanical strength

Female-thread port

Threaded docking with external male-thread pipe / fittings

Slide-tight slide-ring

Axial push-in compression element, produce radial squeezing force on pipe outer wall

Elastic sealing-ring

Generate compressive deformation to fill gap between pipe and fitting inner-cavity for leak-proof sealing

  • Operating Principle

  1. Thread-end connection: Align fitting internal-thread with mating external male-thread pipe-component, rotate fitting to engage threads and tighten to proper torque.
  2. Slide-tight slip-crimp connection: Insert properly-processed pipe into fitting's slide-tight sleeve cavity. Apply dedicated slide-tight tool to push slide-ring along pipe surface. Slide-ring moves axially and produces radial contraction squeezing force. Under pressure, built-in sealing-ring deforms to fully fill clearance between pipe outer-wall and fitting inner-chamber, achieving reliable sealed joint.

Operating reminder: Dedicated matched slide-tight tool is mandatory. Improper tool will cause incomplete crimping and hidden leakage faults.

 

Application Scenarios

  • Water-Supply & Drainage Systems

Use-case: Cold-hot-water pipeline connection inside building plumbing-engineering. Project value: Welding-free quick assembly, demountable structure facilitates later-stage pipe maintenance.

  • HVAC Heating-Ventilation-Air-Conditioning Systems

Use-case: Connection for heating pipes and air-conditioning circulating-water pipelines. Project value: Dual-seal construction adapts temperature-cycling working-conditions for heating-loop systems.

  • Industrial Piping Systems

Use-case: Projects requiring fast erection and convenient disassembly-maintenance for process pipelines. Project value: Multi-material pipe compatibility satisfies diverse industrial-site connection-demands.

 

Installation Guide

  • Pre-Installation Check

  1. Confirm fitting DN-size, female-thread specification match project design; prepare size-matched dedicated slide-tight tool.
  2. Inspect fitting body, slide-ring and elastic sealing-ring; reject components with crack, scratch or ageing damage.
  3. Square-cut pipe end; completely remove burr, chip and sharp edges on pipe outer-wall. Burr will scratch sealing-ring.
  • Installation Steps

  1. For female-thread end: Wind PTFE-tape 3-5 clockwise turns on mating male-thread component. Screw-on fitting, apply torque only on fitting body flats, do not stress slide-tight sleeve section.
  2. Put slide-ring and sealing-ring onto pipe in correct order. Insert pipe fully into slide-tight sleeve inner stop shoulder.
  3. Mount dedicated slide-tight tool, push slide-ring steadily to specified position to finish slip-crimp compression operation.
  4. After whole assembly completion, slowly pressurize system, inspect threaded-joint and slide-tight crimp-joint for leakage.
  • Important Installation Notes

  1. Installation recommended for qualified plumbing technicians.
  2. Must adopt size-matched original slide-tight tool; wrong tool leads to incomplete crimp-sealing.
  3. Pipe-end must be square and deburred; burrs damage sealing-ring and cause leakage.
  4. Do not use partial-crimped joint; slide-ring must reach designated final position.

 

Maintenance & Troubleshooting

Phenomenon

Probable Root-Cause

Recommended Solution

Slide-tight crimp-joint leakage

Pipe-end burr; slide-ring not pushed to full position; ageing / damaged sealing-ring

Disassemble joint; re-process pipe-end; replace brand-new sealing-ring; re-execute complete slide-crimp operation with correct tool

Female-thread joint leakage

Insufficient PTFE-tape; scratched thread

Re-apply sealing-tape; replace damaged fitting or mating component

Slide-ring cannot move smoothly

Dirt or scale inside slide-tight sleeve cavity

Disassemble, clean inner-cavity and slide-ring

Routine-Maintenance Suggestion

  • Visual inspection of thread-joint and slide-tight crimp-joint for leakage: Quarterly
  • Check slide-ring position status during system overhaul: Annually
  • Replace ageing sealing-ring spare-parts upon leakage failure: As-required

 

FAQ

Q: Can slide ring and sealing ring be reused after disassembly?

A: Not recommended. Sealing ring generates permanent compression deformation after crimping. Install brand new sealing ring for reassembly to guarantee sealing reliability.

Q: Can I assemble slide tight joint manually without special tool?

A: Forbidden. Manual pushing cannot reach required crimp compression force, which will produce potential leakage risk. Dedicated slide tight tool is compulsory.

Q: Can it be used for steam medium?

A: Standard version fits 5-90℃ liquid phase non-corrosive liquid. Steam service needs special high temperature resistant sealing ring variant specified while ordering.

 

Products Summary

Yuanlun internal-thread direct sliding fastener is composite brass pipe-fitting combining female-thread docking and slide-tight slip-crimp connection. PN16 pressure-rating, DN15-DN50 size-range. Dual-seal mechanism, welding--free erection, demountable without pipe-cutting, compatible with plastic, copper and stainless-steel pipes. Widely-applied in building water-supply-drainage, HVAC heating-air-conditioning and light-industrial piping-systems. Sample-order supported for pre-project-evaluation, 15-day standard lead-time for worldwide plumbing-HVAC distributors and engineering-contractors.

 

Factory Information

Zhejiang Yuanlun Valve Co., Ltd. was founded in 2006, formerly known as Yuhuan Guohong Valve Co., Ltd. It is located in Yuhuan, Zhejiang Province, known as the "Valve Capital of China". After nearly two decades of stable development, Yuanlun Valve is a professional manufacturer for HVAC valves integrating R&D, production and sales. Our product portfolio covers floor heating systems, air-conditioning systems, domestic water valves, including ball valves, thermostatic valves, manifolds, check valves, stop valves, filter valves, angle valves, pipe fittings, corrugated pipes and other series.

 

 

Hot Tags: internal thread direct sliding fastener, China internal thread direct sliding fastener manufacturers, suppliers, factory, Compression-style equal diameter straight connectorh, pipe fittings, Inner Ribbon Elbow, Equal Diameter Male Threaded Tee Fitting, Equal Diameter Elbow Sliding Fastener, Female Thread Elbow Sliding Fastener

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!