MF Manual Angle Radiator Valve
Three Connection Models for Any Radiator Piping
Radiator installations use different pipe materials. Threaded steel pipe. PPR plastic. Union connections for maintenance access. Most manual radiator valves are built for one pipe type only - requiring additional adapters when the pipe material differs, adding cost and potential leak points.
The Yunnl manual angle radiator valve provides three connection models within one valve family:
| Model | Connection Type | Best For |
|---|---|---|
| Model 4 | Standard male-female thread | Metal threaded piping, renovation projects |
| Model 5 | Union joint | Quick disassembly, radiator maintenance |
| Model 6 | PPR adapter | New-build PPR heating pipelines |
One valve family. Three connection options. Covers all common heating pipe materials.
| Feature | Standard Valve | This Manual Angle Valve |
|---|---|---|
| Connection type | One type only | Three connection models |
| Flow direction | Straight - requires extra elbow | 90° angle integrated |
| Flow balancing | Not available | Manual flow adjustment |
| Maintenance access | Requires breaking pipe joints | Model 5 has union for quick removal |
Product Overview
Yunnl MF manual angle radiator valve is a 90° angle valve designed for radiator inlet connections. The valve provides manual flow regulation via a rotary handwheel, allowing heating technicians to balance heat output across multiple radiators.
Three connection models cover all common pipe types:
| Model | Connection | Installation | Best Application |
|---|---|---|---|
| Model 4 | Male-female threaded | Thread sealant + wrench | Metal pipes, renovation |
| Model 5 | Union joint | Union nut hand-tight + wrench | Quick maintenance access |
| Model 6 | PPR adapter | Hot-melt welding | New PPR piping systems |
All three models share:
- Forged brass body, nickel-plated
- Screw-lift regulating mechanism
- EPDM high-temperature seals
- PN10 pressure rating
Model 4 / 5 / 6: Selection Guide
-
Model 4 - Threaded Connection
Connection: One end male thread, one end female thread.
Best for:
- Metal threaded piping (steel, copper)
- Radiator renovation projects
- Systems with existing threaded connections
Installation:
- Apply PTFE tape to male threads
- Thread into the radiator and supply pipe
- Tighten with wrenches
Advantage: Standard threaded connection. No additional adapters required.
-
Model 5 - Union Connection
Connection: One end has a union nut for quick disassembly.
Best for:
- Systems requiring frequent maintenance
- Radiators that may need removal for decoration
- Service access in tight spaces
Installation:
- Thread the fixed end onto the pipe
- Connect the valve body via the union nut
- Hand-tighten, then 1/4 turn with a wrench
Advantage: Radiator can be removed without disturbing the fixed pipe connection. Loosen one union nut to separate the valve.
-
Model 6 - PPR Connection
Connection: One end is a PPR adapter for hot-melt welding.
Best for:
- New-build residential heating
- PPR plastic piping systems
- Modern heating installations
Installation:
- Cut the PPR pipe squarely
- Heat the pipe and PPR adapter
- Weld together (hot-melt)
Advantage: Direct connection to PPR pipe. No adapters required.
Core Advantages
-
90° Angle Design - Space Efficient
The angle body eliminates the need for a separate elbow fitting. When radiators sit tight against side walls, this valve fits compactly into narrow gaps.
-
Three Connection Models - One Valve Family
Model 4 (threaded), Model 5 (union), Model 6 (PPR) - select the correct connection for the pipe type. One product family covers all common heating pipe materials.
-
Manual Flow Balancing
Fine incremental adjustment allows heating technicians to balance circuits. Reduce flow for zones needing less heat; open fully for cold-prone zones.
-
Forged Brass Construction
Hot-forged brass resists thermal fatigue under repeated hot-water temperature cycles. Nickel-plated surface prevents oxidation in damp environments.
-
EPDM Seals - Long-Term Stability
High-temperature EPDM maintains elasticity under cyclic temperature changes. Prevents weeping leakage over years of service.
-
PN10 Pressure Rating
Suitable for standard residential and light-commercial heating systems.





| Feature | Description |
|
Place of origin |
China |
|
Brand name |
Yunnl |
|
Product Name |
MF Manual Angle Radiator Valve |
| Valve Body Material | Forged brass, nickel‑plated surface finish |
| Internal Regulating Mechanism | Screw‑lift manual flow‑adjustment plug |
| Sealing Material | High‑temperature EPDM rubber |
| Thread Standard | BSP thread, NPT thread available upon special request |
| Nominal Pressure | PN10 (1.0 MPa) |
| Working Medium | Closed‑loop heating hot‑water, glycol‑mixed anti‑freeze heating fluid |
| Working Temperature | 5℃ ~ 90℃ |
| Operation Mode | Manual rotary knob adjustment, no automatic thermostatic function |
|
Size |
DN15-DN50 |
|
Minimum Order Quantity |
1 |
|
Price |
Negotiable |
|
Packing |
Yunnl standard packing |
|
Payment Terms |
L/C, D/A, D/P, T/T, Western Union,MoneyGram |
|
Delivery Time |
15 Days |
How the Manual Flow Regulation Works
-
The Screw-Lift Mechanism
| Component | Function |
|---|---|
| Rotary handwheel | Handwheel for flow adjustment |
| Stem | Vertical movement driven by knob rotation |
| Plug / disc | Lifts or lowers toward the seat |
| Seat | Fixed sealing surface |
-
Flow Control
- Clockwise rotation → Stem moves down → Plug lowers → Flow gap narrows → Less water passes through
- Counter-clockwise rotation → Stem moves up → Plug rises → Flow gap widens → More water passes through
-
Scale Markers
- The handwheel has printed scale markers. Installers can:
- Record the setting position for each radiator
- Replicate settings across multiple radiators
- Identify open/closed status at a glance
Application Scenarios
-
Residential Radiator Heating
Application: Individual radiator flow control in houses and apartments.
Model: Model 4 (threaded) or Model 6 (PPR).
Value: Manual flow balancing across multiple radiators. Handwheel adjustment.
-
Radiator Renovation Projects
Application: Replacing old valves in existing radiator systems.
Model: Model 4 (threaded) - matches existing metal pipe threads.
Value: Direct replacement, no pipe modification required.
-
New-Build PPR Heating Systems
Application: New houses with PPR heating pipelines.
Model: Model 6 (PPR) - direct hot-melt connection.
Value: No adapters required. Direct hot-melt connection.
-
Maintenance-Accessible Installations
Application: Radiators that need periodic removal for decoration or service.
Model: Model 5 (union) - quick disconnect.
Value: Remove radiator without disturbing fixed pipes.
-
Light-Commercial Office Heating
Application: Panel radiator systems in offices and small commercial spaces.
Model: Model 4 or Model 5 depending on pipe type.
Value: Individual zone flow control. Maintenance access via union connection.
-
Small-Bore Heating Pipe Networks
Application: Systems with smaller diameter heating pipes.
Model: Any model, matching size (DN15-DN50).
Value: Compact fit for small-bore systems.
Installation Guide
-
Model 4 (Threaded) Installation
- Apply PTFE tape - 3-5 turns clockwise on male threads
- Thread the valve - Connect to both radiator and supply pipe
- Tighten - Use wrenches, do not over-tighten
- Test - Pressurize and check for leakage
-
Model 5 (Union) Installation
- Thread the fixed end - Connect to the supply pipe
- Place the valve body - Align with the radiator
- Tighten the union nut - Hand-tight, then 1/4 turn with a wrench
- Test - Pressurize and check for leakage
-
Model 6 (PPR) Installation
- Cut the PPR pipe - Square cut, no burrs
- Heat - Follow PPR welding temperature (260°C ± 10°C)
- Weld - Insert and hold until cooled
- Connect the other end - Depending on system
- Test - Pressurize and check for leakage
-
Important Notes
- Do not over-tighten - Brass threads can crack
- Model 5 union nut - Hand-tight plus 1/4 turn only
- PPR welding - Follow manufacturer's heating time and temperature
- Scale markers - Record settings for future reference
Maintenance & Troubleshooting
| Problem | Likely Cause | Solution |
|---|---|---|
| Valve leaking | Thread seal failed / O-ring worn | Re-seal; replace O-ring |
| Handwheel stiff | Scale accumulation / Stem dry | Lubricate stem; flush system |
| Radiator not heating | Valve not open / Blocked | Check knob position; flush valve |
| Handwheel scale worn | Normal wear | Use position markers for reference |
| Union nut loose | Model 5 only - insufficient tightening | Retighten union nut |
FQA
Q: What is the difference between Model 4, 5, and 6?
A: Model 4 is threaded connection for metal pipes. Model 5 has a union nut for quick disassembly. Model 6 has a PPR adapter for hot-melt welding. Select based on pipe type and maintenance requirements.
Q: Is this valve automatic like a TRV?
A: No. This is a manual valve. It does not sense room temperature or adjust automatically. For automatic temperature control, see our thermostatic radiator valve (TRV) series.
Q: What is the pressure rating?
A: PN10 (1.0 MPa / 10 bar). Suitable for standard heating systems.
Q: What is the temperature range?
A: 5°C to 90°C, covering all standard heating water applications.
Q: What thread standards are available?
A: BSP is standard. NPT is available on request for Model 4.
Q: Is Model 5 compatible with any pipe type?
A: Model 5 has a threaded connection on one end and a union on the other. It works with metal threaded pipes and provides quick disassembly.
Q: What sizes are available?
A: DN15, DN20, DN25, DN32, DN40, DN50.
Q: Are samples available?
A: Yes, MOQ is 1 unit. Sample orders are supported.
Q: What is the lead time?
A: 15 working days.
Q: Is the handwheel scale replaceable?
A: The handwheel is a complete assembly. Replacement handwheels are available if the scale markers wear out.
Quality Assurance
- 100% factory pressure-tightness test
- 100% thread gauge inspection
- Material certification - brass composition confirmed
- ISO 9001 certified facility
Ordering Information
- Sample order: 1 unit minimum
- Bulk orders: Volume pricing
- Customization: Model (4/5/6), size, thread type (BSP/NPT), custom marking
- Lead time: 15 working days
- Payment: L/C, T/T, D/A, D/P, Western Union, MoneyGram
Products Summary
Yunnl MF manual angle radiator valve provides space-saving 90° connection for wall-mounted radiators. Three models cover metal-thread, union, and PPR-pipe connection requirements. Forged nickel-plated brass body with EPDM heating-grade seals provides manual hot-water flow balancing for residential and light-commercial radiator heating loops. Samples available. 15-day production lead-time supports global heating-system distributors and installation contractors.
Hot Tags: mf manual angle radiator valve, China mf manual angle radiator valve manufacturers, suppliers, factory, MF Manual Radiator Valve
